Goose Gear Toyota 4Runner 6th Gen Second-Row Seat Delete — 2025+ Hybrid, Module-Based

The Module-Based Second-Row Seat Delete completes the interior sleeping platform on the 6th-gen 4Runner Hybrid and turns the rear into a stealth camping setup with added interior height and storage. It provides more usable storage than any seat delete Goose Gear has produced while keeping a flat, comfortable sleeping surface. Each module includes a pillow extension, and ordering both the 40% and 60% sides creates a full 100% second-row delete.

Who it's for

A great fit if you have a 2025+ 4Runner 6th Gen Hybrid, already run the rear plate and drawers, and want to convert the second row into a sleep deck with deep storage. Look elsewhere if you have a Non-Hybrid 4Runner, which uses the plate-based Non-Hybrid Seat Delete, or you want to keep your rear seats.

Where this fits in your build

• System role: Second-row seat delete / sleep deck — module-based, mounts on the drawers over the rear plate.
• You need first: The Hybrid Rear Plate System plus side-by-side or other drawer modules must be installed first; they are the seat delete's main attachment point and are not included.
• Pairs with / completes the build: Add a universal IceBox 1.2 fridge module for a galley. Prefer it bundled with the plate? See the Hybrid Stealth Sleep Package.

Will it fit your rig?

• Fits the 2025+ Toyota 4Runner 6th Gen, Hybrid only. It will not fit Non-Hybrid vehicles.
• Requires the Hybrid Rear Plate System and drawer modules installed first; they serve as the main attachment point and are not included.
• Order the 40% driver's LH side, the 60% passenger's RH side, or both for a 100% delete.
• No cutting or drilling of any kind is required for installation.

Specs

• The 60% delete has dual top access doors plus side hatches when the passenger doors are open; the 40% has a single top access hatch and side hatches.
• Storage sits at the center and lowest point of the vehicle, which helps stability.
• Pillow extension included; overall length is 78" (1980mm) with it, 70" (1775mm) without.
• 60% delete weighs 33 lb (15 kg); 40% delete weighs 27 lb (12.3 kg).

Common questions

What do I need before this? The Hybrid Rear Plate System and drawer modules must be installed first; the seat delete mounts to the rear of the drawers. Neither is included.

Will it fit a Non-Hybrid 4Runner? No. It is a Hybrid-specific design and will not fit Non-Hybrid vehicles.

Can I delete just one side? Yes. Order the 40% driver's side or the 60% passenger's side on its own, or both for a full 100% delete.

How long is the sleep area? 70" (1775mm) on its own, extending to 78" (1980mm) with the included pillow extension.

Does it need drilling? No. No cutting or drilling of any kind is required for installation.

How much does it weigh? The 60% delete is 33 lb (15 kg) and the 40% delete is 27 lb (12.3 kg).

Complete your 4Runner 6th-Gen Hybrid build

Required base: the Hybrid Rear Plate System plus drawer modules install first.

Cooking & cold (universal, mounts on the plate): IceBox 1.2 · IceBox 1.2 with Top Drawer.

Prefer it bundled: the Hybrid Stealth Sleep Package pairs the plate with both 40/60 seat deletes.

Finishing touches: Explore Series Anchors · Strap Kit · Cutting Board.

See it all: the full Goose Gear Toyota 4Runner 6th Gen lineup.