Goose Gear Toyota 4Runner 6th Gen Second-Row Seat Delete — 2025+ Non-Hybrid, Plate-Based

The Second-Row Seat Delete replaces the back seats with a flat, load-rated plate and turns the interior into a sleep deck with secure storage underneath. It is available for the 40% driver's LH side, the 60% passenger's RH side, or both for a full 100% second-row delete. A tool-free pillow extension stretches the overall sleep length from 72" (1820mm) to 80" (2032mm) for taller sleepers, and stows under the seat delete when not in use.

Who it's for

A great fit if you have a 2025+ 4Runner 6th Gen Non-Hybrid and want to remove the back seats for a flat, stealth sleep platform with storage below. Look elsewhere if you have a Hybrid 4Runner, which uses the module-based Hybrid Seat Delete, or you want to keep your rear seats.

Where this fits in your build

• System role: Second-row seat delete / sleep deck — plate-based, ties into the rear plate.
• You need first: The Non-Hybrid Rear Plate System must be installed first (per Goose Gear, go with the Goose Gear plate).
• Pairs with / completes the build: Add storage drawers on the rear plate and a universal IceBox 1.2 fridge module for a galley. Prefer it bundled? See the Stealth Sleep & Storage Package.

Will it fit your rig?

• Fits the 2025+ Toyota 4Runner 6th Gen, Non-Hybrid, non-third-row vehicles only.
• Requires the Non-Hybrid Rear Plate System to be installed first.
• Order the 40% driver's side, the 60% passenger's side, or both for a 100% delete.
• The pillow extension installs without tools and stows under the seat delete.

Specs

• 100% bolt-in and completely reversible.
• Two hatches access the storage space below the seat-delete plate.
• Pillow extension increases total plate length from 72" (1820mm) to 80" (2032mm).
• 40% side weighs 17.5 lb (7.9kg) versus the 47 lb (21.3kg) factory seat; 60% side weighs 22.5 lb (10.2kg) versus the 74 lb (33.5kg) factory seat.
• 40% usable area about 30" long x 22-3/4" wide at the widest, 16-1/2" at the narrowest; 60% usable area about 30" long x 32-3/4" wide at the widest, 26-3/8" at the narrowest.
• 40% Seat Delete SKU 2260; 60% Seat Delete SKU 2261.

Common questions

Do I need the rear plate too? Yes. The plate-based seat delete ties into the Non-Hybrid Rear Plate System, which must be installed first.

Can I delete just one seat? Yes. Order the 40% driver's side or the 60% passenger's side on its own, or both for a full 100% second-row delete.

Will it fit a Hybrid 4Runner? No. Hybrid vehicles use the module-based Hybrid Seat Delete. This one is Non-Hybrid only.

How long is the sleep area? 72" (1820mm) on its own, extending to 80" (2032mm) with the tool-free pillow extension for taller sleepers.

Is there storage under it? Yes. Two hatches access the storage space below the seat-delete plate.

Is it reversible? Yes. It is 100% bolt-in, so you can return the rig to stock later.

Complete your 4Runner 6th-Gen Non-Hybrid build

Required base: the Non-Hybrid Rear Plate System installs first.

Cooking & cold (universal, mounts on the plate): IceBox 1.2 · IceBox 1.2 with Top Drawer.

Prefer it bundled: the Stealth Sleep & Storage Package pairs the plate, a module seat delete and a side-by-side drawer.

Finishing touches: Explore Series Anchors · Strap Kit · Cutting Board.

See it all: the full Goose Gear Toyota 4Runner 6th Gen lineup.