Toyota FJ Cruiser K9 Roof Rack Kit

The Eezi-Awn K9 Roof Rack is a modern take on the expedition platform: thinner, lighter, quieter, and more aerodynamic than the cage racks it replaces, and strong enough to carry a rooftop tent, awning, and a full load of gear. This kit is cut specifically for the Toyota FJ Cruiser and bolts on with no drilling.

Key Features

• Vehicle-specific, no-drill fit: The proprietary mounting rail sits over the roof pinch-weld trim and uses the OEM roof rack mounting points. No drilling is required on any size.
• Two widths, five lengths: Offered in 1250mm (49") and 1400mm (55") widths across five lengths. The 2.2M (87") is far and away the most popular — a favorite of Expedition Overland — running from just behind the windshield to just in front of the rear hatch.
• Engineered for the FJ's roof: The FJ Cruiser's egg-shaped roof is leveled with three foot heights — two 65mm at the front, two 40mm in the middle, and two 90mm at the rear — so the platform sits flat.
• Serious capacity: On a suitably suspended vehicle, dynamic loads around 500 lb (tent, awning, fuel cans, storage case, recovery gear, and more) and static loads up to 1000 lb are achievable. These figures are not warrantied and your capacity will vary.
• Accessory ecosystem: Bolt-on jerry can holders, axe and shovel mounts, Hi-Lift and MaxTrax mounts, awning mounts, and under-rack table mounts attach directly to the platform.
• Thule & Yakima compatible: Store-accessible 6mm hardware attaches existing Thule or Yakima sport-bar mounts (Thule Podium Foot Pack 460 with Fit Kit KIT3101; Yakima Skyline Tower with Landing Pad 4) to the K9 perimeter for bikes, kayaks, and more.

Specifications

Fitment

Cut specifically for the Toyota FJ Cruiser (2007–2014), with three foot heights to sit flat on its egg-shaped roof. No drilling required.

See more for your rig in the FJ Cruiser collection, and add mounts and holders from our roof rack accessories.

Ships LTL freight, contiguous U.S.