Goose Gear INEOS Grenadier (2024+) Rear Plate System

The Rear Plate System is the flat, bolt-in foundation the rest of your Goose Gear Grenadier build attaches to — it replaces the factory rear floor liner with a level deck (about 41-5/8″ wide by 34-3/4″ long) that accepts drawer modules, a CampKitchen or IceBox, a Solo Fridge Slide, and second-row seat deletes. It installs with no cutting or drilling and carries embedded anchor points for tying down gear. At about 22 pounds it's also a clean load floor on its own.

Who it's for

A great fit if you want the base every other Goose Gear Grenadier module bolts to — drawers, a seat delete or a galley. Look elsewhere if you're going the full camper route — the Venture Series Roof Conversion Interior uses its own base plate — or you only want a standalone seat delete (the Grenadier delete doesn't strictly require this plate).

Where this fits in your build

• System role: Foundation — drawers, galley modules and seat deletes bolt to this plate.
• You need first: Nothing — this is the starting point. Removing the rear floor liner is part of install.
• Pairs with / completes the build: Add a drawer module, a second-row seat delete, or a universal CampKitchen / IceBox galley.

Will it fit your rig?

• Fits the INEOS Grenadier, 2024–present (1st Gen).
• Requires removing the rear factory floor liner and anchor points; no cutting or drilling of the vehicle.
• Includes extra-long hardware to optionally reuse the OEM utility rail on top of the plate.
• Note: with drawers or a CampKitchen fitted, door-mounted tables won't fit — the Grenadier's rear cargo area is short.

Specs

• Industrial-grade plywood with Goose Gear's proprietary protective coating.
• Usable surface approximately 41-5/8″ (1058 mm) wide × 34-3/4″ (885 mm) long.
• Embedded anchor points for Goose Gear Slotted and Round Anchors.
• No cutting or drilling. Plate weight about 22 lb (10 kg).
• Made in the USA.

Common questions

Do I need this before anything else? For drawers and galley modules, yes — they bolt to this plate. The second-row seat delete is the exception; it's recommended but not strictly required.

Does it require drilling? No — it bolts in after you remove the rear factory floor liner. No cutting or drilling of the vehicle.

What can I mount on it? Single and side-by-side drawer modules, a fridge drawer, a universal CampKitchen or IceBox, a Solo Fridge Slide, and your own gear via the anchor points.

How big is the usable surface? About 41-5/8″ wide by 34-3/4″ long — a flat, level deck across the rear cargo area.

Will my door-mounted table still fit? No — once drawers or a CampKitchen are installed there isn't room; the Grenadier's rear area is short.

Can I reuse the OEM utility rail? Yes — the plate ships with extra-long hardware so you can run the factory utility rail on top of the plate.

Complete your Grenadier build

Every module below bolts to this plate:

Seat deletes & sleep: Second-Row Delete (plate) · 40%/60% Modules · Reclining Brackets

Drawers & storage: Single Drawer · Fridge Drawer · Side-by-Side (fitted top) · Side-by-Side

Cooking & cold (universal): CampKitchen 2.31 · IceBox 1.31 · Solo Fridge Slide

Complete packages: Stealth Sleep & Chef · Sleep & Storage · Brian’s Favorite · Brian’s Favorite Sleep · Brad’s Favorite

Going full camper? The Venture Series Roof Conversion Interior adds a sink, water and power interior for roof conversions.

See it all: the full Goose Gear INEOS Grenadier lineup