AuxBeam & Blue Sea Bracket for Toyota Tundra 2nd Gen (2007–2021)

Building a 2nd Gen Toyota Tundra for off-grid travel means feeding a lot of accessories, and an auxiliary power system keeps that load centralized, controlled, and protected instead of spliced into factory circuits. This brushed-aluminum bracket mounts your power hub cleanly to the top of the factory fuse box on the 2007–2021 Tundra.

Built for AuxBeam — not just the pricey systems. Most auxiliary-power brackets are cut for expensive controllers like sPOD or Switch-Pros. This one is purpose-made to mount an AuxBeam switch panel (BA80 or Single Series) — a far more affordable way to run a clean, switched accessory setup — and it also accepts a Blue Sea Systems 12-circuit fuse block if you'd rather keep it simple with a controller-free fused-power hub.

Pick your components at checkout, then pick your mount: 3M VHB tape for a no-drill install, or bolts (which require drilling four small holes). Rubber grommets to protect the main power cables are included.

Worth knowing: the AuxBeam controller or Blue Sea fuse block and the small screws that fasten it to the bracket (#8-32 with Nyloc nuts or lock washers) are not included — you supply the components. Going AuxBeam? Order a kit whose controller measures 6.3" x 4.1" to fit.

Fitment check: measure the top of your fuse box — you need at least 10-3/4" x 5" of flat space.

What's included

• 1 × brushed-aluminum bracket
• Your choice of stainless mounting hardware or 3M VHB tape
• Rubber grommets to protect the main power cables

Browse our electrical & power lineup or everything for your 2nd Gen Tundra.