Heavy Metal Off-Road
Toyota Tundra 2000-2006 Bed Bars by Heavy Metal Off-Road
Choose options
Heavy Metal Off-Road Bed Bars for the 2000-2006 Toyota Tundra are one of the few overhead bar systems still built for the first gen truck. They put a rooftop tent or long gear above the rails and keep the bed open for everything else.
The bars are 1.75 in outside diameter, 11-gauge HREW steel, with feet matched to this bed. Buy one bar, two or three. With an even load, HMOR rates two bars at 500 lb and three at 750 lb, parked or in smooth driving; there is no published single-bar figure, and trail impacts can exceed the smooth-motion rating. Mounting is HMOR's no-drill pinch clamp, and no bed cap or plastic trim has to be cut.
These bars are supplied in raw steel, HMOR's standard finish, so plan to paint or coat them before they see weather. Pair them with HMOR's bed rack accessories, such as utility crossmembers or bolt-on tube mounts, or browse more truck bed racks.
Specifications
| Fitment | Toyota Tundra 2000-2006 |
|---|---|
| Tube | 1.75 in OD, 11-gauge HREW steel |
| Heights | 9 in, 19 in, 24 in |
| Configurations | Single bar, set of 2, set of 3 |
| Load rating (even load) | Set of 2: 500 lb; set of 3: 750 lb (static and smooth-motion dynamic) |
| Mounting | HMOR Non-Track no-drill pinch clamp |
| Hardware | 3/8 in Grade 5 bolts, washers, nylon lock nuts, no-mod plates |
| Finish | Raw steel |
| Tools | 9/16 in wrench or socket |
Presented by Overland Kitted
The Dispatch
Gear We Like: DVA Mechanics for the Grenadier
MAXTRAX Introduces Universal Mounting Pins for MKII, XTREME, and LITE Boards
