Goose Gear Ford Bronco (6th Gen, 2021+) Single Drawer Module — 22-3/16″W × 25″D

The Single Drawer Module at 22-3/16 inches wide and 25 inches deep gives a 6th-gen Bronco a wide single drawer in the shorter length — generous side-to-side room for bulkier kit while keeping the fore-aft footprint compact. It rolls fully out loaded and latches shut on the trail, and the flat top carries gear or a sleeping platform. It's CNC-cut Baltic birch with a bed-liner coat and bolts straight to the Bronco Rear Plate System.

Who it's for

A great fit if you want a wide drawer but need the shorter 25-inch depth to leave room behind it. Look elsewhere if you need the deeper 28-inch build — the 22″×28″ Single — or two stacked drawers, the 22″ Double.

Where this fits in your build

• System role: Storage module — bolts to the Bronco Rear Plate System.
• You need first: A Goose Gear Bronco Rear Plate System (4-door) or 2-door plate.
• Pairs with / completes the build: Runs alongside other Bronco drawers; add a universal CampKitchen 2.31 or IceBox 1.31 for the galley.

Will it fit your rig?

• Fits the 6th-gen Ford Bronco, 2021–present.
• 22-3/16″ wide × 25″ deep. Choose drawer height (8/10/12″) and Black or Grey.
• The 8-inch height is compatible with a module-based second-row seat delete.
• Mounts to the Goose Gear Bronco Rear Plate System — required for install.

Specs

• Full-extension slides with compression latches, so a loaded drawer rolls fully out and stays shut on the trail.
• CNC-cut Baltic birch with a bed-liner coat.
• Bolts directly to the Bronco Rear Plate System.
• Made in the USA.

Common questions

What do I need to run this? The Goose Gear Bronco Rear Plate System — the module bolts to it.

Does it require drilling? No — it bolts to the plate, which itself installs with no cutting or drilling.

What height and color can I choose? Pick your drawer height and Black or Grey at checkout; wider modules add a drawer-split choice.

Can I run a fridge or camp kitchen beside it? Yes — at this width it leaves room alongside for a universal CampKitchen 2.31, IceBox 1.31 or Solo Fridge Slide on the same plate.

Can I sleep on top? The flat top works as a load or sleep surface; add a second-row seat-delete platform for a full-length deck.

Which drawer height should I choose? 8 inches keeps the load floor low and sits flush with a module-height seat delete; 10 or 12 inches add capacity.

Complete your Bronco 6th-Gen build

Every piece below is cut for the 6th-gen Bronco and bolts to the same Rear Plate System:

Foundation: 4-Door Rear Plate System · Second-Row Seat Delete

More storage: Single Drawer · Double Drawer · Side-by-Side Drawer · Low-Profile Storage Module

Cooking & cold, beside it (universal): CampKitchen 2.31 · IceBox 1.31 · Solo Fridge Slide

See it all: the full Goose Gear Ford Bronco lineup