Goose Gear Ford Bronco (6th Gen, 2021+) 4-Door Second-Row Seat Delete Plate System — Module Height

The 4-Door Second-Row Seat Delete Plate System at module height flattens the back row of a 4-door Bronco and lifts it to sit level with an 8-inch drawer module — so drawers behind and platform ahead read as one continuous deck. Choose a 60% driver / 40% passenger split and the deleted-seat space becomes coated, load-rated deck for storage or sleeping. It's CNC-cut Baltic birch with a bed-liner coat and bolts in over factory points with no cutting or drilling. It builds on the Rear Plate System to turn the 4-door into a flat sleep-and-storage platform matched to module-height drawers.

Who it's for

A great fit if you're running 8-inch drawer modules and want the deleted second-row deck to sit flush with them. Look elsewhere if you want the lowest possible deck — the Low-Profile (3in) seat delete sits lower — or you want to keep both rear seats.

Where this fits in your build

• System role: Second-row extension plate at module (8in) height — flattens the back row level with drawers.
• You need first: The 4-Door Rear Plate System — the seat delete bolts to it and is required for install.
• Pairs with / completes the build: Pairs with 8-inch Side-by-Side or single drawer modules for a flush deck; the Single Drawer with Top Plate completes the level surface.

Will it fit your rig?

• Fits the 6th-gen Ford Bronco 4-door, 2021–present.
• Height matches 8-inch drawer modules for a flush, continuous deck.
• Split: 60% driver-side / 40% passenger-side delete.
• Requires the 4-Door Rear Plate System.

Specs

• CNC-cut Baltic birch with a bed-liner coat.
• Bolts in over the cargo area — no cutting or drilling of the vehicle. Installing the plate requires removing the factory rear slide and carpet kit.
• Deck height matched to 8-inch modules.
• 60/40 driver-passenger second-row delete.
• Made in the USA.

Common questions

Which seat delete do I want, module or low-profile? Module height sits level with 8-inch drawers; the low-profile (3-inch) sits lower for a minimal deck. Match it to your drawers.

Do I need the rear plate too? Yes — it's required; the seat delete bolts to it.

How much weight does deleting the seats save? Goose Gear lists the factory 60% seat at 76 lb and 40% seat at 34 lb; the seat-delete plates weigh 34.5 lb and 26.5 lb respectively.

Can I mount drawers or a kitchen on the deck? Yes — the coated deck takes Goose Gear modules, and a universal CampKitchen, IceBox or fridge slide mounts on the plate.

How many can sleep back there? The flat deck suits two; exact fit depends on your gear layout.

Complete your Bronco 6th-Gen build

This seat delete builds on the Rear Plate System — pair it with drawers and a galley on the same plate:

Required first: 4-Door Rear Plate System — the seat delete bolts to it.

Storage: 8″ Side-by-Side Drawer · Single Drawer sit flush with a module-height deck.

Cooking & cold (universal, mounts on the plate): CampKitchen 2.31 · IceBox 1.31 · Solo Fridge Slide

See it all: the full Goose Gear Ford Bronco lineup