Eezi-Awn K9 Spine cab rack mounted on a 3rd Gen Toyota Tacoma
Single-piece K9 Spine mounting system on a Tacoma cab roof
Welded aluminum K9 platform low-profile edge detail
K9 Spine rack platform viewed from the rear of the Tacoma
Eezi-Awn K9 Spine cab rack side profile on a Tacoma
K9 platform T-slot channels for bolt-on accessories
3rd Gen Tacoma fitted with Eezi-Awn K9 Spine roof rack
Close-up of the K9 Spine mount attachment point
Matte black K9 platform corner and welded joint
Eezi-Awn K9 Spine rack front fairing edge on a Tacoma
Overhead view of the K9 Spine cab rack platform
Toyota Tacoma with Eezi-Awn K9 Spine roof rack installed

Eezi-Awn

Toyota Tacoma 3rd Gen Spine Cab Rack Kit

$1,445.00
SKU: sku-39266535702591
Size (W x L):1250mm x 1.4M | 49" x 55"
Quantity:

The K9 Spine Cab Rack is Eezi-Awn's fastest, cleanest roof rack solution for the 3rd Gen Toyota Tacoma. It runs the same fully welded K9 platform as the rest of the range, but swaps the multi-piece mounting system for a single-piece “Spine” that bolts to the cab roof in far less time and with far less fuss.

Key Features

  • Single-piece Spine mount: a one-person job in roughly 1-1/2 hours — remove the factory rails, attach the Spine to the roof, then drop the platform on top. Written instructions are included.
  • Low-profile welded platform: 1-3/8" thick extruded aluminum with fully welded joints and a matte black powder coat — strong, quiet, and aerodynamic.
  • Thule & Yakima compatible: keep your existing sport mounts for bikes, kayaks, and skis using 6mm hardware around the platform perimeter.
  • Full accessory range: jerry can holders, axe and shovel mounts, Hi-Lift and MaxTrax brackets, awning mounts, under-rack table, and more bolt straight on.
  • Honest trade-off: this Spine Cab Rack is not designed to carry a hard shell roof top tent.

Specifications

Vehicle fitment Toyota Tacoma 3rd Gen (2016+)
Material Extruded aluminum, fully welded, matte black powder coat
Platform thickness 1-3/8"
Width options 1250mm (49") / 1400mm (55") / 1500mm (59")
Length 1.4M (55")
Mounting Single-piece K9 Spine cab mount, all hardware included
Accessory compatibility Thule Podium & Yakima Skyline sport mounts (6mm hardware)
Brand / Origin Eezi-Awn — Johannesburg, South Africa

Fitment

Engineered for the 3rd Gen Toyota Tacoma (2016+). Remove the factory rails and bolt the single-piece Spine to the cab roof; written instructions are included.

See more Tacoma-specific gear in our Tacoma 3rd Gen collection, or browse the full Eezi-Awn K9 roof rack range.

Ships LTL freight, contiguous U.S.

Presented by Overland Kitted

The Dispatch

INEOS Grenadier at camp fitted with a DVA Mechanics LED side flood light
DVA Mechanics

Gear We Like: DVA Mechanics for the Grenadier

The five DVA Mechanics upgrades our Grenadier customers buy most — from the best-selling Starlink mount to the rear spoiler that turns heads.
MAXTRAX Universal Mounting Pins for MKII XTREME and LITE Boards

MAXTRAX Introduces Universal Mounting Pins for MKII, XTREME, and LITE Boards

MAXTRAX has introduced new Universal Mounting Pins that replace multiple previous pin options with a single standardized system. Designed to work across the MAXTRAX range, the new pins simplify rec...
Colfax Design Works Now Available at Overland Kitted
News

Colfax Design Works Now Available at Overland Kitted

We’re proud to announce that Colfax Design Works is now available at Overland Kitted. Built in the USA, the Colfax Q.D.™ Tire Bag delivers 80 liters of durable, weather-resistant storage with a qui...