Goose Gear Ram 2500 / 3500 Alu-Cab Alu-Cabin Canopy Camper Bed Plate System — 2009-Present 4th & 5th Gen, 6'4" Bed

The Alu-Cab Alu-Cabin Canopy Camper Bed Plate System is the foundation of the Goose Gear Alu-Cab interior for the Ram 2500 & 3500 2009-Present 4th & 5th Gen. It bolts into the 6'4" bed and gives you a flat, anchored base that the Alu-Cab modules add to or come off of as needed.

Who it's for

A great fit if you have a Ram 2500 & 3500 2009-Present 4th & 5th Gen with the Alu-Cab Alu-Cabin Canopy Camper (6'4" bed) and want the Goose Gear foundation that the utility, drawer and power modules mount to. Look elsewhere if you don't have the Alu-Cab Canopy Camper on the truck; this system is built specifically for it.

Where this fits in your build

• System role: Foundation bed plate — the anchored base the whole module system builds from.
• You need first: Nothing. This is the first part in the Alu-Cab interior build.
• Pairs with / completes the build: Add the Front Utility Modules, then a Rear Utility or Rear Double Drawer Module on each side to enclose the system, plus the Rear Power Management Module, and finish with a universal Strap Kit.

Will it fit your rig?

• Fits the Ram 2500 & 3500 2009-Present 4th & 5th Gen with the Alu-Cab Alu-Cabin Canopy Camper and the 6'4" bed.
• Requires drilling into the vehicle bed for a proper, safe installation.
• Has integrated anchor points throughout the plate so modules add or remove as needed.
• Base for the Alu-Cab modules; it does not follow the contours of the bed walls.
• Modules are sold separately: driver front utility, driver rear (utility or double drawer), passenger front utility, passenger rear (utility or double drawer).
• Built specifically for the Alu-Cab camper and this bed length — it is not compatible with a Go Fast Camper, A.T. Overland, or other brand's camper.

Specs

• Industrial-grade plywood with Goose Gear's proprietary spray coating.
• Uses the Alu-Cab extrusion channels, which eliminate the back-leg supports the older utility modules needed.
• Levels with spacers on the supplied brackets for a consistent flat surface across the modules.

Common questions

Does it require drilling? Yes. The bed plate drills and bolts into the truck bed for a safe, solid foundation.

What mounts on it? The Alu-Cab front utility, rear utility, rear double drawer and rear power management modules, all sold separately.

Does it follow the bed walls? No. It is a flat base for the modules and does not follow the contours of the bed walls.

What is it made of? Industrial-grade plywood finished with Goose Gear's proprietary spray coating.

Will this work with a different brand's camper? No. It is built specifically for the Alu-Cab camper and this bed length; it does not fit a Go Fast Camper, A.T. Overland, or another brand's camper.

Build out your Ram 2500 & 3500 2009-Present 4th & 5th Gen camper

Finishing (universal): Strap Kit · Cutting Board.

See it all: the Goose Gear Alu-Cab Camper lineup.