{"title":"GG Offroad","description":"\u003cp\u003eGG Offroad is a small Colorado shop that designs plug-in camera and wiring kits for the 2024+ Toyota Tacoma and 2022+ Tundra. The kits move the factory digital rearview mirror, bed view and tailgate backup cameras to a topper, camper, bumper or flatbed, using extension harnesses that plug into the factory connectors instead of cutting into them.\u003c\/p\u003e\n\u003cp\u003eStart with the relocation kit for your truck, then add mounts or the brake light tap cable to suit your shell. Browse more for the \u003ca href=\"\/collections\/tacoma-4th-gen\"\u003eTacoma 4th Gen\u003c\/a\u003e and \u003ca href=\"\/collections\/tundra-3rd-gen\"\u003eTundra 3rd Gen\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"2022-toyota-tundra-tailgate-backup-camera-relocation-cable-kit-3rd-gen","title":"Toyota Tundra 3rd Gen (2022+) Tailgate Backup Camera Relocation Cable Kit","description":"\u003cp\u003eThe GG Offroad Tailgate Backup Camera Relocation Cable Kit for the 2022+ Tundra moves the factory backup camera off the tailgate and onto whatever now sits behind it: a swing-out tire carrier, a high-clearance bumper, a flatbed, a camper or a canopy. The camera keeps its stock image and guidelines, and the \"Camera Unavailable\" message goes away.\u003c\/p\u003e\n\u003cp\u003eA 10 ft braided cable plugs into the factory connectors on both ends, so there is no cutting or splicing. It comes with camera bezels, clips, mounting hardware and an adjustable mount with two angle options. There are two versions. Standard suits Tundras that show a single rear view in reverse. The 360 version suits trucks with the Panoramic View Monitor, which stitches four cameras into an overhead view.\u003c\/p\u003e\n\u003cp\u003eMost installs take under an hour. There is no tailgate-delete adapter for the Tundra; if the tailgate comes off entirely, the CAN bus signals have to be split into the tailgate harness to keep the guidelines, and GG Offroad's install guide covers it. GG Offroad says the kit is made in Colorado. More for the \u003ca href=\"\/collections\/tundra-3rd-gen\"\u003eTundra 3rd Gen\u003c\/a\u003e, or see the \u003ca href=\"\/products\/2024-toyota-tacoma-tailgate-backup-camera-relocation-cable-kit-4th-gen\"\u003eTacoma version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eToyota Tundra 3rd Gen, 2022+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersions\u003c\/th\u003e\n\u003ctd\u003eStandard (no 360 camera); 360 Panoramic View Monitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable\u003c\/th\u003e\n\u003ctd\u003e10 ft braided extension, OEM-style weather-sealed connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMount\u003c\/th\u003e\n\u003ctd\u003eAdjustable, two angle options, camera clips and bezels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera\u003c\/th\u003e\n\u003ctd\u003eNot included; reuses factory camera\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years (GG Offroad)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GG Offroad","offers":[{"title":"Standard (no 360 camera)","offer_id":50496944570560,"sku":"GGO-TGCBL-TUN-STD","price":280.0,"currency_code":"USD","in_stock":true},{"title":"360 Panoramic View Monitor","offer_id":50496944603328,"sku":"GGO-TGCBL-TUN-360","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/3188\/8320\/files\/tacomaremoving_tailgate_a75c7a14-b161-434e-8e51-f5f7affb7442.png?v=1792009881"},{"product_id":"2024-toyota-tacoma-digital-rearview-mirror-and-bed-camera-relocation-kit-for-toppers-4th-gen","title":"Toyota Tacoma 4th Gen (2024+) Digital Rearview Mirror \u0026 Bed Camera Relocation Kit for Toppers","description":"\u003cp\u003eThe GG Offroad Digital Rearview Mirror and Bed Camera Relocation Kit moves the two cameras that live in the Tacoma's third brake light out to your topper or camper shell. Once a shell is on the bed, those cameras are looking at fiberglass, and the mirror either goes black or shows the inside of the cap. Relocating them restores the camera mirror and the bed view.\u003c\/p\u003e\n\u003cp\u003eThe kit uses your factory Toyota cameras. Two braided, shielded extension cables plug into the factory connectors, so nothing gets cut or spliced, and closeout plugs seal the empty camera holes. Pick one of three mounts: a suction cup pair that sticks to the topper glass with no drilling, a pivot arm that screws to the topper ceiling and carries both cameras, or external housings for shells and racks where the cameras ride outside.\u003c\/p\u003e\n\u003cp\u003ePlan on two to four hours. The rear headliner comes down and the taillight comes out to route the cables, and the job is easier before the topper goes on. Your truck needs the factory digital rearview mirror. If the topper has its own third brake light, you will also want the \u003ca href=\"\/products\/brake-light-wiring-tap-cable-tacoma-2024-tundra-2022\"\u003ebrake light wiring tap cable\u003c\/a\u003e. More for the \u003ca href=\"\/collections\/tacoma-4th-gen\"\u003eTacoma 4th Gen\u003c\/a\u003e, or see the \u003ca href=\"\/products\/2022-toyota-tundra-digital-rearview-mirror-and-bed-camera-relocation-kit-for-toppers-3rd-gen\"\u003eTundra version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eToyota Tacoma 4th Gen, 2024+, all trims including i-FORCE MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRequires\u003c\/th\u003e\n\u003ctd\u003eFactory digital rearview mirror and bed view camera\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtension cables\u003c\/th\u003e\n\u003ctd\u003eTwo braided, quad-twisted cables, 23 ft each, double foil and metal braid shielded, 26 AWG, rated to 85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMount options\u003c\/th\u003e\n\u003ctd\u003eSuction cup (no drill), pivot arm (screws to topper ceiling), external housings (T-slot rail or drilled through topper skin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCameras\u003c\/th\u003e\n\u003ctd\u003eNot included; reuses factory cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years (GG Offroad)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GG Offroad","offers":[{"title":"Pivot Arm Mount","offer_id":50496945717440,"sku":"GGO-DRVKIT-TAC4-PA","price":250.0,"currency_code":"USD","in_stock":true},{"title":"External Mount","offer_id":50496945750208,"sku":"GGO-DRVKIT-TAC4-EXT","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Suction Cup Mount","offer_id":50496945782976,"sku":"GGO-DRVKIT-TAC4-SC","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/3188\/8320\/files\/Gemini_Generated_Image_tbe12ltbe12ltbe1.png?v=1792009881"},{"product_id":"pivot-arm-camera-mount-for-digital-rearview-mirror-kit-tundra-tacoma","title":"GG Offroad Pivot Arm Camera Mount for Tacoma 4th Gen \u0026 Tundra 3rd Gen DRV Kits","description":"\u003cp\u003eThe GG Offroad Pivot Arm Camera Mount is an add-on for owners who already run the GG Offroad camera relocation kit on a 2024+ Tacoma or 2022+ Tundra. It screws to the inside of the topper roof and hangs both relocated cameras, the digital rearview mirror camera and the bed view camera, so they look out through the back glass.\u003c\/p\u003e\n\u003cp\u003eThe arm pivots, so you can tilt the cameras to the angle that gives the mirror a clean view, and the cameras stay inside the shell, out of weather and car washes. It fits fiberglass shells such as ARE, Leer and SnugTop.\u003c\/p\u003e\n\u003cp\u003eIt is a mount only. The base fastens with short self-tapping screws, which leave small permanent holes in the topper ceiling. Cables and cameras come with the full kit for the \u003ca href=\"\/products\/2024-toyota-tacoma-digital-rearview-mirror-and-bed-camera-relocation-kit-for-toppers-4th-gen\"\u003eTacoma\u003c\/a\u003e or the \u003ca href=\"\/products\/2022-toyota-tundra-digital-rearview-mirror-and-bed-camera-relocation-kit-for-toppers-3rd-gen\"\u003eTundra\u003c\/a\u003e. More from \u003ca href=\"\/collections\/gg-offroad\"\u003eGG Offroad\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eToyota Tacoma 4th Gen (2024+) and Tundra 3rd Gen (2022+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHolds\u003c\/th\u003e\n\u003ctd\u003eFactory DRV camera and bed view camera\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSelf-tapping screws into the topper ceiling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eExtension cables, cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GG Offroad","offers":[{"title":"Default Title","offer_id":50496945684672,"sku":"MNT-TOP-PVT","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/3188\/8320\/files\/Screenshot2026-05-05212822.png?v=1792009881"},{"product_id":"2024-toyota-tacoma-tailgate-backup-camera-relocation-cable-kit-4th-gen","title":"Toyota Tacoma 4th Gen (2024+) Tailgate Backup Camera Relocation Cable Kit","description":"\u003cp\u003eThe GG Offroad Tailgate Backup Camera Relocation Cable Kit lets a 2024+ Tacoma keep its factory backup camera when the tailgate is blocked or gone. Swing-out carriers, high-clearance bumpers, bike racks, flatbeds and campers all hide the stock camera, and this kit moves it to where it can see again, with the same image and guidelines on the dash.\u003c\/p\u003e\n\u003cp\u003eA 10 ft braided cable plugs into the factory Toyota connectors at both ends, so the harness stays uncut. The kit includes an adjustable mount with two angle positions, camera clips and bezels, so the camera can sit near its original height or above the plate. Choose the version for your build: keeping the tailgate, which adds heat shrink and butt splices, or removing the whole tailgate, which adds the CAN bus adapter the truck needs to stay error-free without it. Whether your Tacoma has the 360 camera system does not change the version.\u003c\/p\u003e\n\u003cp\u003eMost installs take under an hour; the tailgate-delete version adds a short integration step. GG Offroad says the kit is made in Colorado. More for the \u003ca href=\"\/collections\/tacoma-4th-gen\"\u003eTacoma 4th Gen\u003c\/a\u003e, or see the \u003ca href=\"\/products\/2022-toyota-tundra-tailgate-backup-camera-relocation-cable-kit-3rd-gen\"\u003eTundra version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eToyota Tacoma 4th Gen, 2024+, with or without 360 camera\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable\u003c\/th\u003e\n\u003ctd\u003e10 ft braided extension, OEM-style weather-sealed connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersions\u003c\/th\u003e\n\u003ctd\u003eKeeping tailgate (adds heat shrink and butt splices); Removing tailgate (adds CAN bus adapter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMount\u003c\/th\u003e\n\u003ctd\u003eAdjustable, two angle options, multiple camera clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamera\u003c\/th\u003e\n\u003ctd\u003eNot included; reuses factory camera\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years (GG Offroad)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GG Offroad","offers":[{"title":"Removing Entire Tailgate (includes CAN bus adapter)","offer_id":50496945914048,"sku":"GGO-TGCBL-TAC-NOTG","price":310.0,"currency_code":"USD","in_stock":true},{"title":"Keeping Tailgate on Truck","offer_id":50496945946816,"sku":"GGO-TGCBL-TAC-TG","price":280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/3188\/8320\/files\/tacomaremoving_tailgate1.png?v=1792009885"},{"product_id":"2022-toyota-tundra-digital-rearview-mirror-and-bed-camera-relocation-kit-for-toppers-3rd-gen","title":"Toyota Tundra 3rd Gen (2022+) Digital Rearview Mirror \u0026 Bed Camera Relocation Kit for Toppers","description":"\u003cp\u003eThe GG Offroad Digital Rearview Mirror and Bed Camera Relocation Kit moves the two cameras that live in the Tundra's third brake light out to your topper or camper shell. Once a shell is on the bed, those cameras are looking at fiberglass, and the mirror either goes black or shows the inside of the cap. Relocating them restores the camera mirror and the bed view.\u003c\/p\u003e\n\u003cp\u003eThe kit uses your factory Toyota cameras. Two braided, shielded extension cables plug into the factory connectors, so nothing gets cut or spliced, and closeout plugs seal the empty camera holes. Pick one of three mounts: a suction cup pair that sticks to the topper glass with no drilling, a pivot arm that screws to the topper ceiling and carries both cameras, or external housings for shells and racks where the cameras ride outside.\u003c\/p\u003e\n\u003cp\u003ePlan on two to four hours. The rear headliner comes down and the taillight comes out to route the cables, and the job is easier before the topper goes on. Your truck needs the factory digital rearview mirror. If the topper has its own third brake light, you will also want the \u003ca href=\"\/products\/brake-light-wiring-tap-cable-tacoma-2024-tundra-2022\"\u003ebrake light wiring tap cable\u003c\/a\u003e. More for the \u003ca href=\"\/collections\/tundra-3rd-gen\"\u003eTundra 3rd Gen\u003c\/a\u003e, or see the \u003ca href=\"\/products\/2024-toyota-tacoma-digital-rearview-mirror-and-bed-camera-relocation-kit-for-toppers-4th-gen\"\u003eTacoma version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eToyota Tundra 3rd Gen, 2022+, all trims\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRequires\u003c\/th\u003e\n\u003ctd\u003eFactory digital rearview mirror and bed view camera\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtension cables\u003c\/th\u003e\n\u003ctd\u003eTwo braided, quad-twisted cables, 23 ft each, double foil and metal braid shielded, 26 AWG, rated to 85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMount options\u003c\/th\u003e\n\u003ctd\u003eSuction cup (no drill), pivot arm (screws to topper ceiling), external housings (T-slot rail or drilled through topper skin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCameras\u003c\/th\u003e\n\u003ctd\u003eNot included; reuses factory cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years (GG Offroad)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GG Offroad","offers":[{"title":"Pivot Arm Mount","offer_id":50496945815744,"sku":"GGO-DRVKIT-TUN3-PA","price":250.0,"currency_code":"USD","in_stock":true},{"title":"External Mount","offer_id":50496945848512,"sku":"GGO-DRVKIT-TUN3-EXT","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Suction Cup Mount","offer_id":50496945881280,"sku":"GGO-DRVKIT-TUN3-SC","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/3188\/8320\/files\/tundrapivto.png?v=1792009881"},{"product_id":"external-camera-mounts-for-digital-rearview-mirror-kit-tundra-tacoma","title":"GG Offroad External Camera Mounts for Tacoma 4th Gen \u0026 Tundra 3rd Gen DRV Kits","description":"\u003cp\u003eThe GG Offroad External Camera Mounts are an add-on set for trucks already running the GG Offroad camera relocation kit. They house the factory digital rearview mirror camera and the bed view camera on the outside of a topper, camper or bed rack, which suits builds where there is no rear glass to look through.\u003c\/p\u003e\n\u003cp\u003eThe set includes one housing for each camera, angle shims to tune the field of view, and marine-grade heat shrink to seal the connections you route outside. The housings are sized for each truck's cameras, so choose Tacoma or Tundra when you order.\u003c\/p\u003e\n\u003cp\u003eIt is a mount set only. The housings bolt to a T-slot rail or through holes drilled in the topper skin, so plan where the cable will pass through. Cables and cameras come with the full kit for the \u003ca href=\"\/products\/2024-toyota-tacoma-digital-rearview-mirror-and-bed-camera-relocation-kit-for-toppers-4th-gen\"\u003eTacoma\u003c\/a\u003e or the \u003ca href=\"\/products\/2022-toyota-tundra-digital-rearview-mirror-and-bed-camera-relocation-kit-for-toppers-3rd-gen\"\u003eTundra\u003c\/a\u003e. More from \u003ca href=\"\/collections\/gg-offroad\"\u003eGG Offroad\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eToyota Tacoma 4th Gen (2024+) and Tundra 3rd Gen (2022+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eExternal DRV camera housing, external bed view housing, angle shims, marine-grade heat shrink\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eT-slot rail or drilled through topper skin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eExtension cables, cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GG Offroad","offers":[{"title":"Tacoma 2024+","offer_id":50496946045120,"sku":"MNT-TAC24-EXT","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Tundra 2022+","offer_id":50496946077888,"sku":"MNT-TUN22-EXT","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/3188\/8320\/files\/tacoma_mount.png?v=1792009882"},{"product_id":"brake-light-wiring-tap-cable-tacoma-2024-tundra-2022","title":"Toyota Tacoma 4th Gen \u0026 Tundra 3rd Gen Brake Light Wiring Tap Cable","description":"\u003cp\u003eThe GG Offroad Brake Light Wiring Tap Cable gives a topper its own brake light feed by plugging in at the truck's third brake light connector in the headliner. It sits between the truck and the factory light, so the stock third brake light keeps working and nothing in the harness gets cut, spliced or crimped.\u003c\/p\u003e\n\u003cp\u003eIt outputs 12 volts on the red wire when you press the brake, plus a black ground. On the Tacoma version a yellow wire carries 12 volts when the white cargo lamps in the third brake light are on, which is handy for low-draw LED bed lights. Tapping at the headliner instead of a taillight keeps the circuit clear of the turn signals, which GG Offroad says avoids hyper-flashing. The wire is 24 AWG with a TPU jacket rated to 85°C.\u003c\/p\u003e\n\u003cp\u003eThe truck needs a factory third brake light with the white cargo lamps; Tacoma SR trucks without the LED cargo light package and some 2025 and 2026 Tundra trims don't have it. The headliner has to come down, and the cable runs out through the grommet under the rear seat. Pick your truck when ordering; the connectors and lengths differ. It pairs with the \u003ca href=\"\/products\/2024-toyota-tacoma-digital-rearview-mirror-and-bed-camera-relocation-kit-for-toppers-4th-gen\"\u003ecamera relocation kit\u003c\/a\u003e. More for the \u003ca href=\"\/collections\/tacoma-4th-gen\"\u003eTacoma 4th Gen\u003c\/a\u003e and \u003ca href=\"\/collections\/tundra-3rd-gen\"\u003eTundra 3rd Gen\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eToyota Tacoma 4th Gen (2024+) or Tundra 3rd Gen (2022+); factory third brake light with white cargo lamps required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003eRed: 12V with brake applied; Black: ground; Yellow (Tacoma): 12V when cargo lamps are on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire\u003c\/th\u003e\n\u003ctd\u003e24 AWG automotive-grade, TPU jacket rated +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003ctd\u003ePlug-in at the third brake light connector; factory light keeps working\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years (GG Offroad)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GG Offroad","offers":[{"title":"Tacoma 4th Gen","offer_id":50496945979584,"sku":"GGO-BLT-TAC4","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Tundra 3rd Gen","offer_id":50496946012352,"sku":"GGO-BLT-TUN3","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/3188\/8320\/files\/tacomabrake_2fb41085-6683-41ea-9b36-28dbf975cc34.png?v=1792009881"},{"product_id":"tailgate-backup-camera-relocation-mount-tacoma-2024-tundra-2022","title":"GG Offroad Tailgate Backup Camera Relocation Mount, Tacoma 4th Gen \u0026 Tundra 3rd Gen","description":"\u003cp\u003eThe GG Offroad Tailgate Backup Camera Relocation Mount is a spare or second mount for a factory backup camera that has been moved with the GG Offroad tailgate cable kit. It is handy when the camera moves to a second location, or when a bumper, carrier or camper door changes.\u003c\/p\u003e\n\u003cp\u003eThe mount adjusts between two angle options and comes with several camera clips to suit different camera sizes, plus mounting hardware, heat shrink tubing and butt splices for tidy wiring.\u003c\/p\u003e\n\u003cp\u003eIt is a mount only; the camera and cable are not included. The cable kits are here for the \u003ca href=\"\/products\/2024-toyota-tacoma-tailgate-backup-camera-relocation-cable-kit-4th-gen\"\u003eTacoma\u003c\/a\u003e and the \u003ca href=\"\/products\/2022-toyota-tundra-tailgate-backup-camera-relocation-cable-kit-3rd-gen\"\u003eTundra\u003c\/a\u003e. More from \u003ca href=\"\/collections\/gg-offroad\"\u003eGG Offroad\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eToyota Tacoma 4th Gen (2024+) and Tundra 3rd Gen (2022+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdjustment\u003c\/th\u003e\n\u003ctd\u003eTwo angle options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eMount, camera clips, mounting hardware, heat shrink tubing, butt splices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eCamera, extension cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GG Offroad","offers":[{"title":"Default Title","offer_id":50496946110656,"sku":"MNT-TAIL-01","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/3188\/8320\/files\/Gemini_Generated_Image_vcfyz3vcfyz3vcfy.png?v=1792009884"},{"product_id":"suction-cup-camera-mount-for-digital-rearview-mirror-kit-tundra-tacoma","title":"GG Offroad Suction Cup Camera Mount for Tacoma 4th Gen \u0026 Tundra 3rd Gen DRV Kits","description":"\u003cp\u003eThe GG Offroad Suction Cup Camera Mount holds one relocated factory camera against the inside of the topper's rear glass, with no drilling. It is an add-on for trucks already running the GG Offroad camera relocation kit on a 2024+ Tacoma or 2022+ Tundra.\u003c\/p\u003e\n\u003cp\u003eA high-pull suction base sticks to smooth glass, and a multi-axis joint lets you set the camera's angle for your topper. The housing is made from UV-resistant material. Each mount is sold singly with a housing for either the digital rearview mirror camera or the bed view camera, so order one of each to mount both.\u003c\/p\u003e\n\u003cp\u003eSuction mounts work on smooth glass shells such as ARE, Leer, SnugTop, SmartCap and Westin. Cables and cameras are not included; they come with the full kit for the \u003ca href=\"\/products\/2024-toyota-tacoma-digital-rearview-mirror-and-bed-camera-relocation-kit-for-toppers-4th-gen\"\u003eTacoma\u003c\/a\u003e or the \u003ca href=\"\/products\/2022-toyota-tundra-digital-rearview-mirror-and-bed-camera-relocation-kit-for-toppers-3rd-gen\"\u003eTundra\u003c\/a\u003e. More from \u003ca href=\"\/collections\/gg-offroad\"\u003eGG Offroad\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eToyota Tacoma 4th Gen (2024+) and Tundra 3rd Gen (2022+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersions\u003c\/th\u003e\n\u003ctd\u003eBed view camera mount; Digital rearview (DRV) camera mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSuction cup on smooth glass, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdjustment\u003c\/th\u003e\n\u003ctd\u003eMulti-axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eExtension cables, cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GG Offroad","offers":[{"title":"Bedview Mount","offer_id":50496946143424,"sku":"BVM-SC-01","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Digital Rearview (DRV) Mount","offer_id":50496946176192,"sku":"DRV-SC-01","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/3188\/8320\/files\/PXL_20260610_143214446_compressed.jpg?v=1792009883"}],"url":"https:\/\/overlandkitted.com\/collections\/gg-offroad.oembed","provider":"Overland Kitted","version":"1.0","type":"link"}